The full-featured PolyScience Programmable Controller, combined with circulator placement flexibility, makes this "design your own bath" circulator a great value. Microprocessor PID control assures high accuracy and stability.
The Programmable Controller features a multi-language graphic display and time/temperature programming. Ten programs can be stored in the controller's memory; each can have up to fifty steps and can be cycled up to 99 times. An RS232 interface and remote probe capability are standard. The included software supports LabView™ drivers and Excel® macros to offer even greater programming and data logging convenience.
For internal circulation or external open and closed loop applications, the 7312 has a strong pressure and suction (duplex) pump with variable speed control. The optional remote probe gives more accurate temperature control in applications where external circulation is required.
The expandable mounting bridge spans openings from 15 to 25 in. across to allow placement on almost any bath container. Choose from PolyScience's selection of stainless steel or acrylic baths or use your own reservoir.
FEATURES
Time / Temperature Programmability
Variable-Speed Pump
Controllable Though RS-232 Interface
RS-232 Cable Supplied
Remote Probe Capability
7312 Specifications
Temperature Range*
Ambient +5º to 200ºC*
Temperature Stability*
± 0.01ºC
Controller/RS232
Programmable/yes
Readout
Graphics LCD
Temperature Readout
ºC or ºF
Pressure Flow
30 lpm max. (60 Hz) 22 lpm max. (50 Hz)
Suction Flow
22 lpm max. (60Hz) 15 lpm max. (50Hz)
Tank Occupancy, Approx.
7½ x 8¾ in.
Immersion
Min. 2½ in. / 7 cm Max.4½ in. / 11.4 cm
Overall Dimensions l x w x h
11¼ x 15 x 9½ in. 28.6 x 38x 24.2 cm
Heater
60Hz/1100 Watts, 50Hz/2200 Watts
Over-Temperature Cutoff
Adjustable
Low-Liquid Cutoff
Yes
Pump Inlet & Outlet
1/4 in. FPT Rear Discharge
Shipping Weight
24 lbs. / 11kg
Cat. No. 120V, 60Hz, 11A
7312A11B
Cat. No. 240V, 50/60Hz, 9.7A
7312A12E
*Temperature range and stability vary depending on bath volume, surface area, insulation and type of fluid.
Notes: Performance specifications determined at ambient temperature of 20ºC/68ºF.
